Carmanah F Series Instal Manual - Halaman 10

Jelajahi secara online atau unduh pdf Instal Manual untuk Sistem Keamanan Carmanah F Series. Carmanah F Series 20 halaman. Rrfb mast arm kit
Juga untuk Carmanah F Series: Panduan Memulai Cepat (20 halaman), Instal Manual (20 halaman), Instal Manual (16 halaman), Manual Penggantian Sistem Manajemen Energi (12 halaman), Panduan Pengguna (18 halaman), Manual Penggantian (9 halaman), Instal Manual (18 halaman)

Halaman Cetak
Carmanah F Series Instal Manual
• Obtain 3" of red and 3" of black wire supplied with the kit.
• Strip ends of both wires 0.35".
• Use small flat bladed screwdriver to depress each terminal button and insert the wire into the terminal.
7
• Install one end of the red wire into the left BAT+ terminal.
• Install one end of the black wire into the right BAT− terminal.
• Insert the other end of each wire into two of the 5-position splice terminals.
• Route the two red battery harness wires into the
splice terminal with the red wire from BAT+.
8
• Route the two black battery harness wires into the
splice terminal with the black wire from BAT−.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com
Install Battery Jumper Wires and Splice Terminals
Make sure all wire strands go into the terminal hole.
APPLIED INFORMATION (AI) INTEGRATION KIT INSTALL GUIDE
Red
wires
E/F Series
Black
wires
Page 10