Andersen 82-3ST Manual del producto - Página 6

Navegue en línea o descargue pdf Manual del producto para Cabrestantes Andersen 82-3ST. Andersen 82-3ST 12 páginas.

ANDERSEN Stainless Steel Winches

Your Andersen winch is made with the care and craftsmanship that come from more than sixty

years of experience. Andersen winches are built to last, to retain their exceptional finish and to

deliver season after season of reliable performance and sailing pleasure to their owners through

the years.

INSTALLATION

Required for installation:

•

Drilling/mounting templates for 82-3ST winch

•

Hex key, 5mm (included)

•

Hex key, 10mm for winch mounting bolts

•

Drill bit Ø12.5mm

•

6x ISO 4762-A4 M12 mounting bolts (length as required for deck thickness)

•

6x M12 locking nuts and large washers (or backing plate to match drilling template)

•

Spanner, 19mm for mounting bolt locking nuts

•

Sealant / bedding compound

Step 1 Determine mounting location and orientation

Position the winch with the recommended line entry angle of 3-8° from horizontal. The self-

tailing arm should be positioned to allow the rope to drop clear of the winch as it feeds out of

the self-tailer. Positions will typically be as indicated by the shaded sectors in the diagram. The

self-tailing arm can be adjusted after installation into one of 12 different positions, as indicated

on the drilling template.

Note the drainage grooves on the underside of the winch base. If the mounting surface is not

horizontal due to deck camber or other factors, plan the installation such that water may drain

away from the winch base towards the lowest point in relation to the slope of the mounting

surface.

Drainage grooves