Inicio
Marcas
Bosch
Secadora
Bosch Instructions for Use
Manual de instrucciones de instalación y funcionamiento
Página 19

Bosch Instructions for Use Manual de instrucciones de instalación y funcionamiento - Página 19

Imprimir página

Bosch Instructions for Use Manual de instrucciones de instalación y funcionamiento

What to do if...

Fault code

Other fault codes are only for use by the after-sales service. Make a note of the fault code to inform the after-

sales service.

Fault

Programme does not start.

The maximum spin speed

cannot be set.

The water is not Drained.

Detergent residues in the

detergent drawer.

Risk of electric shock.

Repairs must only be carried out by customer services or authorised

technicians.

If repairs are needed, or if you cannot rectify a fault yourself with the help

of the following table:

Set the programme selector to Off.

Disconnect the washer-dryer from the power supply.

Turn off the tap.

Call the after-sales service –> page 22.

The door is not properly closed. Close the door.

The water control system has been activated. Disconnect the appliance from

the mains, turn off the tap and advise the after-sales service.

Water is not entering the appliance. See the fault Water is not flowing in.

The water is not Drained. See the fault Water is not Drained.

Maximum or minimum drying load not taken into account. HI/End or LO/End

flash alternately in the display. See information for the Drying result not

satisfactory fault.

Possible cause

The A (Start/Pause) button has not

been pressed.

A delayed start time has been

selected.

Power cut.

The delayed start time that was

selected has been cleared.

The door is not properly closed.

Plug not inserted properly into socket. Insert plug correctly.

The maximum spin speed depends on

the programme selected.

Drain hose is twisted.

Detergent pump is blocked.

Damp or lumpy detergent.

Remedial action

Press the A (Start/Pause) button.

Washer dryer starts on completion of

the delay period.

Change the "finished in time" if

necessary –> page 13.

Reselect the delayed start time or start

the programme immediately.

Press the A (Start/Pause) button.

Close the door.

Change programme as required.

Fit the Drain hose correctly.

Clean the Drain pump –> page 18.

Clean and dry the detergent drawer –

> page 17.

Use the measuring aid for liquid

detergent.