Bosch Instructions for Use Manual de instrucciones de instalación y funcionamiento - Página 24

Removing the transport

safety bolts

Positioning and

levelling

Positioning

Unscrew all four screws

using the spanner

supplied.

Insert the protective

covers.

– Appliance stability is essential to ensure that the washer-dryer does not

"creep" during spin cycles.

– The installation area must be firm, clean and level.

– Parquet floors and soft floor coverings, e.g. carpets or foam-backed

floor coverings, are unsuitable.

Slide sheets make it easier to slide the washing machine into the

installation recess.

– Can be ordered from the after-sales service, spare part no. 66 1827.

– Moisten the slide sheets with a mixture of water and washing-up liquid

before sliding the washer-dryer into place. Do not use grease and/or

oil.

Remove all 4 transport safety bolts

completely and take the mains cable out of

the retainers.

– Before using the appliance for the first

time, you must make sure that all

4 transport safety bolts have been

removed and kept safe for any

subsequent transport.

– If you need to transport the appliance at a

later date, always refit the transport safety

bolts to prevent damage to the washer-

dryer.