ATIGO A1701 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Sistema de interfono ATIGO A1701. ATIGO A1701 10 páginas.

Setting Slave monitors

The system allows a maximum of four monitors per apartment or house, one Master monitor and three

slave monitors. Each apartment must have at least 1 Master monitor in order to work correctly. To

address extra Slave monitors, simply address the same code used by the Master monitor.

Code 8000 should be used by the Master monitor, code 8001 by 1

Slave monitor, 8002 by 2

Slave

monitor and code 8003 by 3

Slave monitor.

Setting monitor panel mode

By default, when a call is received from the door entry panel, all monitors in the apartment or house

will ring but only the Master monitor will display the image. In order to make all monitors to ring and

show the image when a call is received, the setting 8006 must be set on all slave monitors.

Setting unlock mode and time

The default setting to unlock the door release is mode 0 or Fail-locked and the code number for this

option is 8010. To change to mode 1 or Fail-unlocked please enable code 8011.

To change the unlock time this can be done by changing the code number between 8401 and 8499

which correspond to unlock time between 1 and 99 seconds.