ATIGO A1701 사용자 설명서 - 페이지 8
{카테고리_이름} ATIGO A1701에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ATIGO A1701 10 페이지.
Setting Slave monitors
The system allows a maximum of four monitors per apartment or house, one Master monitor and three
slave monitors. Each apartment must have at least 1 Master monitor in order to work correctly. To
address extra Slave monitors, simply address the same code used by the Master monitor.
st
nd
Code 8000 should be used by the Master monitor, code 8001 by 1
Slave monitor, 8002 by 2
Slave
rd
monitor and code 8003 by 3
Slave monitor.
Setting monitor panel mode
By default, when a call is received from the door entry panel, all monitors in the apartment or house
will ring but only the Master monitor will display the image. In order to make all monitors to ring and
show the image when a call is received, the setting 8006 must be set on all slave monitors.
Setting unlock mode and time
The default setting to unlock the door release is mode 0 or Fail-locked and the code number for this
option is 8010. To change to mode 1 or Fail-unlocked please enable code 8011.
To change the unlock time this can be done by changing the code number between 8401 and 8499
which correspond to unlock time between 1 and 99 seconds.