Anderson M-115 Manual del usuario - Página 15
Navegue en línea o descargue pdf Manual del usuario para Vehículo utilitario Anderson M-115. Anderson M-115 18 páginas. Log loader on a r-flex 410 trailer
4.1 Before each Use :
It is very important to check the unit's hydraulic oil level because a pump that misses oil
will quickly break (in less than a minute of operation). Maintain a minimum oil level of 3 inches
(7.5cm) below the hydraulic oil cap. Also check the oil level of the unit's motor and the fuel level.
Open the motor's return gas valve if needed.
4.2 Greasing Gun Maintenance :
Everyday or every 4 hours of operation you will need to grease all
cylinders ends and pivoting joints of your loader (except the hydraulic tandem).
See the diagram below for the following greasing points. The pivoting mast (4
nipples), the grapple pivot (10 nipples), the draw bar and the tandem pivots
need to be grease daily.
A Basic Model Greasing Point Summary :
MAST : 3 GREASE
FITTING
DON'T FORGET TO GREASE THE GEARS AT EVERY 100 HOURS
Maintenance and Troubleshooting
4
STICK : 3 GREASE
FITTING
BASE : 4 GREASE FITTING
WE RECOMMEND THE USE OF
SYNTETHIC GREASE FOR ALL
THE LOG LOADER
ROTATOR : 2 GREASE
FITTING
GRABBLE : 10
GREASE FITTING
14