CAROL BTM-210C Manual - Página 8

Navegue en línea o descargue pdf Manual para Adaptador CAROL BTM-210C. CAROL BTM-210C 12 páginas. Bluetooth d35/xlrt/ transmitter, bluetooth receiver

Imprimir página

1. Components and Function

Taiwan Carol Electronics Co., Ltd.

4. Troubleshooting

Problem

Cannot power on

Cannot connect

Mobile phone and receiver

(RX) are ever connected,

but fail to remain

connected.

Mobile phone and receiver

(RX) are connected, but

there is no sound.

5. Specifications

5.1 Compatibility Standard: Bluetooth specification V2.1 EDR

5.2 Support: Advanced Audio Distribution Profile (A2DP)

5.3 Radiated Power Specification: Class 1

5.4 Communication Distance: at least 20 meters (straight-line distance)

5.5 Battery quantity, specification: AAA size ×4 (TX×2 , RX×2 )

5.6 Battery Life: approximately 8 hours

5.7 Receiver (RX) is equipped with Ø6.3 Phone Plug

5.8 XLR transmitter (TX) is equipped with XLR socket, suitable for dynamic microphone

5.9 Ø3.5 transmitter (TX) is equipped with ø3.5 Phone Jack (socket) suitable for capacitor

microphone

5.10 Carrier Band: ISM band 2.400~2.4835GHz

5.11 Radiation Power: +12dBm

5.12 Radiation Reception Sensitivity: -90 to –20dBm

5.13 Maximum Output Voltage: 100mVrms

5.14 Maximum Current Consumption: 80mA

5.15 Frequency Response: 20~20KHz

Make sure that battery power is sufficient.

If power still cannot be turned on, remove batteries first and complete

cut off the power for Bluetooth receiver (transmitter). After 10

seconds, try it again.

Turn on receiver (RX) first, transmitter (TX) later.

Except receiver (RX) and transmitter (TX), turn off all unrelated

Bluetooth devices within effective distance.

Press the button continuously five times. Red light will flash quick

five times to clear pairing data (required for all pairing devices

including receiver (RX), transmitter (TX), mobile phone or

computer). Try connecting it again.

Press the button continuously three times. Red light will flash quickly

three times for manual connection.

It is suggested to clear old paring data record for mobile phone. Repeat

procedures "search>pair>connect". Similarly, receiver (RX) may also

need to clear pairing data.

Make sure that the mobile phone has correct music play mode and the

volume is at adequate level without being muted.

Solution