- ページ 8
アダプター CAROL BTM-210CのPDF マニュアルをオンラインで閲覧またはダウンロードできます。CAROL BTM-210C 12 ページ。 Bluetooth d35/xlrt/ transmitter, bluetooth receiver
Taiwan Carol Electronics Co., Ltd.
4. Troubleshooting
Problem
Cannot power on
Cannot connect
Mobile phone and receiver
(RX) are ever connected,
but fail to remain
connected.
Mobile phone and receiver
(RX) are connected, but
there is no sound.
5. Specifications
5.1 Compatibility Standard: Bluetooth specification V2.1 EDR
5.2 Support: Advanced Audio Distribution Profile (A2DP)
5.3 Radiated Power Specification: Class 1
5.4 Communication Distance: at least 20 meters (straight-line distance)
5.5 Battery quantity, specification: AAA size ×4 (TX×2 , RX×2 )
5.6 Battery Life: approximately 8 hours
5.7 Receiver (RX) is equipped with Ø6.3 Phone Plug
5.8 XLR transmitter (TX) is equipped with XLR socket, suitable for dynamic microphone
5.9 Ø3.5 transmitter (TX) is equipped with ø3.5 Phone Jack (socket) suitable for capacitor
microphone
5.10 Carrier Band: ISM band 2.400~2.4835GHz
5.11 Radiation Power: +12dBm
5.12 Radiation Reception Sensitivity: -90 to –20dBm
5.13 Maximum Output Voltage: 100mVrms
5.14 Maximum Current Consumption: 80mA
5.15 Frequency Response: 20~20KHz
1.
Make sure that battery power is sufficient.
2.
If power still cannot be turned on, remove batteries first and complete
cut off the power for Bluetooth receiver (transmitter). After 10
seconds, try it again.
1.
Turn on receiver (RX) first, transmitter (TX) later.
2.
Except receiver (RX) and transmitter (TX), turn off all unrelated
Bluetooth devices within effective distance.
3.
Press the button continuously five times. Red light will flash quick
five times to clear pairing data (required for all pairing devices
including receiver (RX), transmitter (TX), mobile phone or
computer). Try connecting it again.
4.
Press the button continuously three times. Red light will flash quickly
three times for manual connection.
It is suggested to clear old paring data record for mobile phone. Repeat
procedures "search>pair>connect". Similarly, receiver (RX) may also
need to clear pairing data.
Make sure that the mobile phone has correct music play mode and the
volume is at adequate level without being muted.
8
Solution