Andis TC-2 Manual de instrucciones de uso y mantenimiento - Página 5

Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Cortapelos Andis TC-2. Andis TC-2 20 páginas.

OPERATING INSTRUCTIONS

Plug cord into electrical outlet, operate at 100-240V, 50/60 Hz cycle AC electrical

current or as noted on the unit. To start clipper/trimmer move switch button to "On"

(–) position; to stop, move switch button back to original (O) position. After using

your Andis clipper/trimmer, re-wrap cord loosely and store in a safe place. For care of

the cord, untwist it while in use.

DUAL VOLTAGE

Confirm the voltage available at each overseas location before using the appliance.

For connection to a 240V supply, use an attachment plug adapter of the proper

configuration for the power supply receptacle.

USING THE ATTACHMENT COMBS

You can set the blades for a longer cut by using any of the attachment combs made

for your Andis clipper/trimmer. The combs mount easily; simply slip the cutter blade

teeth into comb and snap the comb down (Figures A & B). To remove, simply snap

off. These attachment combs guide hair into the blades and give you precise control

of hair lengths. The length of trim is indicated on the attachment comb. Use the chart

to find the approximate lengths of cut. Different blade angles in relation to the skin,

thickness and texture of the hair will vary the cutting length.

USER MAINTENANCE

The internal mechanism of your clipper/trimmer has been permanently lubricated

at the factory. Other than the recommended maintenance described in this manual,

no other maintenance should be performed, except by Andis Company or an Andis

authorized service station. To find an Andis authorized service station near

you log on to andis.com or contact our customer service department at

1-800-558-9441.

BLADE TEMPERATURE

Due to the high speed nature of Andis clippers, please check for blade heat often,

especially on close cutting blades. If blades are too hot, dip the blades only into

Andis Blade Care Plus or apply Andis Cool Care Plus and then Andis Clipper Oil.

If you have a detachable blade unit, you can change your blade in order to maintain

a comfortable temperature.