Atlantic Alcove Manual de instalación y funcionamiento - Página 15
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Calentador Atlantic Alcove. Atlantic Alcove 18 páginas. Inertia radiator / cast iron heating element
Imprimir página
What you want to do
Choose the set temperature
for ECO mode.
Note :
- The Eco temperature may not be greater than the Comfort temperature.
- The suggested Eco temperature is Comfort -3.5°C. It may be accessed directly by pushing the
keys.
5.1.3 - Using Freeze Protection Mode
What you want to do
Choose Freeze
Protection Mode
Nota : The Freeze Protection temperature is pre-set at ~ 7°C and may not be changed
5.1.4 - Using the PROG Mode
What you want to do
Choose the PROG mode
N.B.: For more information regarding scheduling, consult part 6 - Programming
6 - Programming Your Radiator
To minimize your consumption and maximize your comfort, we suggest you use the scheduling system.
6.1 - What is a Scheduling System?
- A scheduling system is a system that operates your device in order to heat in comfort mode when you are
present and eco mode when you are absent or during the night. Flexible and easy to use, this system manages
the alternation between these two modes.
- There are several scheduling systems.
o Centralized external scheduling: you have a central unit that manages all devices. Your installer connects
your devices to this installation and enters the schedule hours corresponding to your lifestyle.
o Individual external scheduling: your device may host a scheduling card. You defi ne the appropriate sche-
dule hours with your installer and insert the card in the back of the device. When programmed, your device
recognizes pilot line orders: Comfort / Comfort -1 / Comfort -2 / Eco.
For more information please consult your scheduler or energy manager's manual
7- Equilibrium Function
To immediately set the recommended settings use the Equilibrium function. It represents a balance between
your comfort and savings.
What you want to do
Activate the Equilibrium
function
What you need to do so
Press the
and
keys.
Stop on the desired temperature and
OK
validate with the
key.
I
What you need to do so
Press the
and
keys.
I
Stop at Freeze Protection
OK
validate with
.
What you need to do so
Press the
and
keys.
Stop under the PROG mode and
validate with
OK
.
équilibre
What you need to do so
Press the
key.
équilibre
What will happen
The temperature moves in increments
of 0.5°C and fl ashes.
The temperature chosen is displayed.
What will happen
The cursor
moves under the
modes and fl ashes.
Only the Freeze Protection
and
remains displayed with the tempera-
ture set at 7°C.
What will happen
The cursor
moves under the
modes and fl ashes.
PROG mode remains displayed as
well as the mode set by the schedule
and the relevant temperature.
What will happen
«Equilibrium» is displayed for a few
seconds on the screen.
OK
+
I
mode