Electrolux DBL5230CN Manual - Página 40

Navegue en línea o descargue pdf Manual para Campana de ventilación Electrolux DBL5230CN. Electrolux DBL5230CN 44 páginas.

Connection in Ducting Version

When installing the ducting version,

connect the hood to the chimney using

either a flexible or rigid pipe ø 150 or

125 mm, the choice of which is left to

the installer.

To install a ø 150

• To install the dumper 10a.

• Fix the pipe in position using suffi-

cient pipe clamps (not supplied).

To install a ø 125

• To install a ø 125 mm air exhaust

connection, insert the reducer flange

9 on the dumper 10a.

• To install the Adapting ring 10b.

• Fix the pipe in position using suffi-

cient pipe clamps (not supplied).

• Remove any activated charcoal fil-

ters.

Connection in Recycling Ver-

sion

• Connect the flange to the outlet on

the shelf over the hood using a flex-

ible or rigid pipe (ø120 or 150 mm).

• To install a ø 120 mm air exhaust

connection, insert the reducer flange

9 on the hood body outlet.

• Fix the pipe in position using suffi-

cient pipe clamps (not supplied).

• Ensure that the activated charcoal

filters have been inserted.

Electrical Connection

• Connect the hood to the mains

through a two-pole switch having a

contact gap of at least 3 mm..

electrolux 40

Installation

ø 150

10a

ø 125

10b

10a

ø120

9 9