Electrolux DBL5230CN Manual - Halaman 40

Jelajahi secara online atau unduh pdf Manual untuk Kap Ventilasi Electrolux DBL5230CN. Electrolux DBL5230CN 44 halaman.

Connection in Ducting Version

When installing the ducting version,

connect the hood to the chimney using

either a flexible or rigid pipe ø 150 or

125 mm, the choice of which is left to

the installer.

To install a ø 150

• To install the dumper 10a.

• Fix the pipe in position using suffi-

cient pipe clamps (not supplied).

To install a ø 125

• To install a ø 125 mm air exhaust

connection, insert the reducer flange

9 on the dumper 10a.

• To install the Adapting ring 10b.

• Fix the pipe in position using suffi-

cient pipe clamps (not supplied).

• Remove any activated charcoal fil-

ters.

Connection in Recycling Ver-

sion

• Connect the flange to the outlet on

the shelf over the hood using a flex-

ible or rigid pipe (ø120 or 150 mm).

• To install a ø 120 mm air exhaust

connection, insert the reducer flange

9 on the hood body outlet.

• Fix the pipe in position using suffi-

cient pipe clamps (not supplied).

• Ensure that the activated charcoal

filters have been inserted.

Electrical Connection

• Connect the hood to the mains

through a two-pole switch having a

contact gap of at least 3 mm..

electrolux 40

Installation

ø 150

10a

ø 125

10b

10a

ø120

9 9