Electrolux DFKTWC75GS Manual de uso y mantenimiento - Página 9
Navegue en línea o descargue pdf Manual de uso y mantenimiento para Campana de ventilación Electrolux DFKTWC75GS. Electrolux DFKTWC75GS 20 páginas. Electrolux vent hood use & care guide installation instructions
Imprimir página
Install mounting bracket
1. Construct wood wall framing that is flush with inte-
rior surface of wall studs.
Make sure:
a) the framing is centered over installation loca-
tion.
b) the height of the framing will allow the mounting
bracket to be secured to the framing within the
dimensions shown.
2. After wall surface is finished, secure mounting
bracket to framing using dimensions shown.
FRAMING BEHIND DRYWALL
37"= bottom of hood 24" above cooktop
43"= bottom of hood 30" above cooktop
Install flue mounting bracket
DUCTED AND NON-DUCTED
1. Assemble the flue mounting bracket, adjusting
outside width as shown.
2. Carefully center the mounting bracket directly over
the range hood location.
3. Secure the bracket assembly to the ceiling using (2)
4.8x38mm mounting screws and drywall anchors.
Make sure the bracket is pushed into the corner,
tight against the wall and centered over the hood.
FLUE MOUNTING BRACKET
FLAT HEAD BRACKET SCREWS
10-5/8"
(270.4 mm)
Installation
3.9 x 6 mm
9