- ページ 9

換気フード Electrolux DFKTWC75GSのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux DFKTWC75GS 20 ページ。 Electrolux vent hood use & care guide installation instructions

ページを印刷する

Install mounting bracket

1. Construct wood wall framing that is flush with inte-

rior surface of wall studs.

Make sure:

a) the framing is centered over installation loca-

tion.

b) the height of the framing will allow the mounting

bracket to be secured to the framing within the

dimensions shown.

2. After wall surface is finished, secure mounting

bracket to framing using dimensions shown.

FRAMING BEHIND DRYWALL

37"= bottom of hood 24" above cooktop

43"= bottom of hood 30" above cooktop

Install flue mounting bracket

DUCTED AND NON-DUCTED

1. Assemble the flue mounting bracket, adjusting

outside width as shown.

2. Carefully center the mounting bracket directly over

the range hood location.

3. Secure the bracket assembly to the ceiling using (2)

4.8x38mm mounting screws and drywall anchors.

Make sure the bracket is pushed into the corner,

tight against the wall and centered over the hood.

FLUE MOUNTING BRACKET

FLAT HEAD BRACKET SCREWS

10-5/8"

(270.4 mm)

Installation

3.9 x 6 mm