Electrolux EFC 650 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Campana de ventilación Electrolux EFC 650. Electrolux EFC 650 13 páginas. Electrolux cooker hood
También para Electrolux EFC 650: Manual del usuario (12 páginas), Manual del usuario (14 páginas), Instrucciones de funcionamiento e instalación (12 páginas), Manual de funcionamiento e instalación (12 páginas), Instrucciones de funcionamiento e instalación (10 páginas), Instrucciones de uso e instalación (10 páginas), Instrucciones de uso e instalación (10 páginas), Manual del usuario (12 páginas)

Imprimir página
Electrolux EFC 650 Manual del usuario

Charcoal filter

• The charcoal filter should only be used if you
want to use the hood in the recirculation
function.
• To do this you will need an original
ELECTROLUX charcoal filter (available from
your local Service Force Centre).
• This filter cannot be cleaned or reused.
• As a general rule, the activated carbon
filter should be changed once every four
months.
• Mounting — Fig. 4
Fit one carbon filter on the left and one on the
right so to cover the plastic grids that protect the
fan wheel, then turn clockwise the central
handle of the carbon filter.
• To remove proceed in the reverse order.
• Always specify the hood model code number
and serial number when ordering replacement
filters. This information is shown on the
registration plate located on the inside of the
unit.
• The charcoal filter can be ordered from your
local ELECTROLUX Service Force Centre.

Changing the light bulb

• Disconnect the cooker hood from the main
supply.
• Remove the lamp cover.
• Replace the old bulb with a new one of the
same type.
• Remount the lamp cover.
• If the light does not come on, make sure the
bulb has been inserted in correctly before
contacting the technical assistance service.
Changing the light bulb -
only models EFC 9405 - 6405
• Disconnect the cooker hood from the main
supply.
• Remove the lamp cover, use a screw driver as a
lever. Fig. 5.
• Replace the old bulb with a new one of the
same type.
• Refit the lamp cover.
• If the light does not come on, make sure the
bulb has been inserted correctly before
contacting your local Service Force Centre.
Fig. 4
34
Fig. 5