Electrolux EFC 650 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Campânula de ventilação Electrolux EFC 650. Electrolux EFC 650 13 páginas. Electrolux cooker hood
Também para Electrolux EFC 650: Manual do utilizador (12 páginas), Manual do utilizador (14 páginas), Instruções de utilização e de instalação (12 páginas), Manual de operação e instalação (12 páginas), Instruções de utilização e de instalação (10 páginas), Instruções de utilização e de instalação (10 páginas), Instruções de utilização e de instalação (10 páginas), Manual do utilizador (12 páginas)

Imprimir página
Electrolux EFC 650 Manual do utilizador

Charcoal filter

• The charcoal filter should only be used if you
want to use the hood in the recirculation
function.
• To do this you will need an original
ELECTROLUX charcoal filter (available from
your local Service Force Centre).
• This filter cannot be cleaned or reused.
• As a general rule, the activated carbon
filter should be changed once every four
months.
• Mounting — Fig. 4
Fit one carbon filter on the left and one on the
right so to cover the plastic grids that protect the
fan wheel, then turn clockwise the central
handle of the carbon filter.
• To remove proceed in the reverse order.
• Always specify the hood model code number
and serial number when ordering replacement
filters. This information is shown on the
registration plate located on the inside of the
unit.
• The charcoal filter can be ordered from your
local ELECTROLUX Service Force Centre.

Changing the light bulb

• Disconnect the cooker hood from the main
supply.
• Remove the lamp cover.
• Replace the old bulb with a new one of the
same type.
• Remount the lamp cover.
• If the light does not come on, make sure the
bulb has been inserted in correctly before
contacting the technical assistance service.
Changing the light bulb -
only models EFC 9405 - 6405
• Disconnect the cooker hood from the main
supply.
• Remove the lamp cover, use a screw driver as a
lever. Fig. 5.
• Replace the old bulb with a new one of the
same type.
• Refit the lamp cover.
• If the light does not come on, make sure the
bulb has been inserted correctly before
contacting your local Service Force Centre.
Fig. 4
34
Fig. 5