Electrolux SL series Utilice - Página 37

Navegue en línea o descargue pdf Utilice para Campana de ventilación Electrolux SL series. Electrolux SL series 45 páginas.

FUNCTIONS AND USE

SL SERIE: LED ABOVE PUSH BUTTONS
The led points above the push buttons
are showing the 4 different speeds of the
motor.
It turns on and off the lights.
It increases the speeds of the motor.
The highest speed is shown with the led
flashing and after 10 minutes the motor goes
automatically to speed 2.
It decreases the speed of the motor.
It stops the motor
TIMER: with the first, second or third
speed after 10 minutes it sets the automatic
switch off of the motor and the Led point
above the push button is flashing..
REMOTE CONTROL
The functions of the controls can be activated also by a remote control.
For the hoods of the GL serie it is possible to order the remote control as
accessory
The remote control is set up by the manufacturer. If the remote control is not
controlling motor or light nearby the cooker hood, please do the following.
Set up of the remote control:
Keep pressing the
confirm that the remote control has been recognized a long beep is issued. If you do not hear
the acoustic signal within 30 seconds, please repeat the steps as described.
INTERVAL FUNCTION
A specific function of this appliance is the Interval Function which consists in activating the
motor in automatic way 10 minutes each hour at the flashing shown speed.
push button of the remote control and the connect the cooker hood. To
GL: BUTTONS WITH LIGHT ON THE BACK
The led points of the push buttons
are showing the 4 different speeds of the
motor.
Short pressing: it switches the lights on
and off.
Long pressing: it changes the intensity of
the light.
it is normal to have a little whistle with
middle intensity of the light.
first speed
second speed
third speed
Highest speed: the point of the led is
flashing and after 10 minutes the motor goes
automatically to the second speed.
it stops the motor
TIMER: on the first, second or third speed
it sets after 10 minutes the switching off of the
motor and the point of the led is flashing.
37