- ページ 37

換気フード Electrolux SL seriesのPDF 用途をオンラインで閲覧またはダウンロードできます。Electrolux SL series 45 ページ。

ページを印刷する

FUNCTIONS AND USE

SL SERIE: LED ABOVE PUSH BUTTONS

The led points above the push buttons

are showing the 4 different speeds of the

motor.

It turns on and off the lights.

It increases the speeds of the motor.

The highest speed is shown with the led

flashing and after 10 minutes the motor goes

automatically to speed 2.

It decreases the speed of the motor.

It stops the motor

TIMER: with the first, second or third

speed after 10 minutes it sets the automatic

switch off of the motor and the Led point

above the push button is flashing..

REMOTE CONTROL

The functions of the controls can be activated also by a remote control.

For the hoods of the GL serie it is possible to order the remote control as

accessory

The remote control is set up by the manufacturer. If the remote control is not

controlling motor or light nearby the cooker hood, please do the following.

Set up of the remote control:

Keep pressing the

confirm that the remote control has been recognized a long beep is issued. If you do not hear

the acoustic signal within 30 seconds, please repeat the steps as described.

INTERVAL FUNCTION

A specific function of this appliance is the Interval Function which consists in activating the

motor in automatic way 10 minutes each hour at the flashing shown speed.

push button of the remote control and the connect the cooker hood. To

GL: BUTTONS WITH LIGHT ON THE BACK

The led points of the push buttons

are showing the 4 different speeds of the

motor.

Short pressing: it switches the lights on

and off.

Long pressing: it changes the intensity of

the light.

it is normal to have a little whistle with

middle intensity of the light.

first speed

second speed

third speed

Highest speed: the point of the led is

flashing and after 10 minutes the motor goes

automatically to the second speed.

it stops the motor

TIMER: on the first, second or third speed

it sets after 10 minutes the switching off of the

motor and the point of the led is flashing.