6 Plug into mains.
EN
EN
7 Turn the knob to the "ON" position then select the program accordingly, or Turn the knob over "ON"
CNS
position onto the desired speed directly ( see no.2 program/speed setting).
WARNING! Never operate appliance without lid. Never run the blender empty, running the blender
empty can cause overheating and can damage the product. Keep hands and utensils out of the
CNT
blender jar while blending.
WARNING! During operation, do not remove your jar from blender base. If it's necessary to remove
KR
the jar, please turn off the appliance first then remove it.
WARNING! With heavy load ( maximum capacity), do not let the blender run for more than 2 minutes.
Allow it to cool down for at least 20 minutes before continuing.
ID
Pro Tips! With Pulse mode you can give the ingredients a quick mix to achieve your desired consistency.
TH
8 The blender will operate until the program is finished. To stop any program manually, turn the knob to
OFF position.
VN
9 Remove the jar ( 3 ) from blender base ( 5 ) by turning it counterclockwise and pull it off, then pour and
serve.
AR
10 Wash the components right after use in order to avoid drying of food residue on components.
Pro Tips! Always detach blade assembly with jar and rinse them clean even before placing it into
the dishwasher. Fill the jar with 1.5L lukewarm water and dishwasher liquid then run MAX speed for 30
seconds for rinsing purpose.
11 Using grinder.
a. Fill the ingredients in the grinder jar (11).
b. Push the central blade (12) to blade holder (13) to create a blade assembly.
WARNING! The blades are very sharp!
c. Fasten the blade assembly on the open end of the jar by turning it clockwise. Turn the grinder upside
down.
d. Push down the assembled grinder onto the blender base (5) and rotate it clockwise to lock until it
clicks into position.
e. Turn the knob to the "ON" position then select the program accordingly, or turn the knob over "ON"
position onto the desired speed directly (see no.2 speed setting). Once done, turn the knob to OFF
position.
f. Turn the assembled grinder counterclockwise to release it off from blender base.
g. Take off the blade assembly by turning it counterclockwise.
WARNING! Always take off the blade assembly within 1 minute after blending to avoid hard
disassemble afterwards.
WARNING! Do not touch the sharp blade after grinding as it might be hot after several grinding
cycles.
12 Unplug the appliance.
CLEANING AND CARE
Always unplug the appliance before cleaning
1
Motor Housing. Never immerse the blender base in water! Clean it only with a damp cloth. Do not use
abrasive cleaners, scouring pads or abrasive detergents while cleaning the appliance.
2 Jar (3), blade assembly (4), lid (2), measuring lid (1) and all grinder parts (11-13) are dishwasher safe.
If washing by hand, don't use wire brush, steel wool or bleach to avoid rust.
Notes: Always detach the blade assembly with jar for cleaning to ensure no leftover food stuck in
between.
Don't immerse the Blade assembly into water completely.
WARNING! the blades are very sharp. Handle carefully during cleaning.
TROUBLESHOOTING
www.electrolux.com
PROBLEM
POSSIBLE CAUSE
Blender is not connected to
electrical supply.
You cannot activate or
operate the blender.
Safety switch is not activated.
There is functional problem.
Blade is stuck, due to the pieces
Blades do not turn when
of food are too large or too much
processing.
food in jug.
Machine stops in the
Loading is too heavy hence
middle of blending
motor protector is automatically
process.
activated.
DISPOSAL
This symbol on the product or on its packaging indicates that the product may not be treated as house-
hold waste. To recycle your product, please take it to an official collection point or to an Elec-
trolux service center that can remove and recycle the battery and electric parts in a safe and
professional way. Follow your country's rules for the separate collection of electrical products
and rechargeable batteries.
CUSTOMER CARE AND SERVICE
When contacting Service, ensure that you have the following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Due to the Electrolux policy of continual product development; specifications, colours, and details of our
products and those mentioned in this manual are subject to change without notice.
8
www.electrolux.com
SOLUTION
EN
EN
Check your home power supply and replug.
CNS
Make sure the blade assembly is fastened
and the jar is locked in the right position of
CNT
blender base.
Contact authorized service centre.
KR
Cut food into smaller pieces or reduce
ID
some food.
TH
Unplug, wait for minimum 20 minutes,
reduce some food, then restart.
VN
AR
9
Imprimir página