- ページ 5

換気フード Electrolux UltimateTaste 500のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux UltimateTaste 500 21 ページ。 High power blender
Electrolux UltimateTaste 500 にも：取扱説明書 (24 ページ), 取扱説明書 (20 ページ), 取扱説明書 (12 ページ), 取扱説明書 (16 ページ), 取扱説明書 (16 ページ), 取扱説明書 (26 ページ), ユーザーマニュアル (22 ページ), ユーザーマニュアル (23 ページ), ユーザーマニュアル (16 ページ), ユーザーマニュアル (23 ページ), 取扱説明書 (24 ページ)

ページを印刷する

6 Plug into mains.

7 Turn the knob to the "ON" position then select the program accordingly, or Turn the knob over "ON"

CNS

position onto the desired speed directly ( see no.2 program/speed setting).

WARNING! Never operate appliance without lid. Never run the blender empty, running the blender

empty can cause overheating and can damage the product. Keep hands and utensils out of the

CNT

blender jar while blending.

WARNING! During operation, do not remove your jar from blender base. If it's necessary to remove

the jar, please turn off the appliance first then remove it.

WARNING! With heavy load ( maximum capacity), do not let the blender run for more than 2 minutes.

Allow it to cool down for at least 20 minutes before continuing.

Pro Tips! With Pulse mode you can give the ingredients a quick mix to achieve your desired consistency.

8 The blender will operate until the program is finished. To stop any program manually, turn the knob to

OFF position.

9 Remove the jar ( 3 ) from blender base ( 5 ) by turning it counterclockwise and pull it off, then pour and

serve.

10 Wash the components right after use in order to avoid drying of food residue on components.

Pro Tips! Always detach blade assembly with jar and rinse them clean even before placing it into

the dishwasher. Fill the jar with 1.5L lukewarm water and dishwasher liquid then run MAX speed for 30

seconds for rinsing purpose.

11 Using grinder.

a. Fill the ingredients in the grinder jar (11).

b. Push the central blade (12) to blade holder (13) to create a blade assembly.

WARNING! The blades are very sharp!

c. Fasten the blade assembly on the open end of the jar by turning it clockwise. Turn the grinder upside

down.

d. Push down the assembled grinder onto the blender base (5) and rotate it clockwise to lock until it

clicks into position.

e. Turn the knob to the "ON" position then select the program accordingly, or turn the knob over "ON"

position onto the desired speed directly (see no.2 speed setting). Once done, turn the knob to OFF

position.

f. Turn the assembled grinder counterclockwise to release it off from blender base.

g. Take off the blade assembly by turning it counterclockwise.

WARNING! Always take off the blade assembly within 1 minute after blending to avoid hard

disassemble afterwards.

WARNING! Do not touch the sharp blade after grinding as it might be hot after several grinding

cycles.

12 Unplug the appliance.

CLEANING AND CARE

Always unplug the appliance before cleaning

Motor Housing. Never immerse the blender base in water! Clean it only with a damp cloth. Do not use

abrasive cleaners, scouring pads or abrasive detergents while cleaning the appliance.

2 Jar (3), blade assembly (4), lid (2), measuring lid (1) and all grinder parts (11-13) are dishwasher safe.

If washing by hand, don't use wire brush, steel wool or bleach to avoid rust.

Notes: Always detach the blade assembly with jar for cleaning to ensure no leftover food stuck in

between.

Don't immerse the Blade assembly into water completely.

WARNING! the blades are very sharp. Handle carefully during cleaning.

TROUBLESHOOTING

www.electrolux.com

PROBLEM

POSSIBLE CAUSE

Blender is not connected to

electrical supply.

You cannot activate or

operate the blender.

Safety switch is not activated.

There is functional problem.

Blade is stuck, due to the pieces

Blades do not turn when

of food are too large or too much

processing.

food in jug.

Machine stops in the

Loading is too heavy hence

middle of blending

motor protector is automatically

process.

activated.

DISPOSAL

This symbol on the product or on its packaging indicates that the product may not be treated as house-

hold waste. To recycle your product, please take it to an official collection point or to an Elec-

trolux service center that can remove and recycle the battery and electric parts in a safe and

professional way. Follow your country's rules for the separate collection of electrical products

and rechargeable batteries.

CUSTOMER CARE AND SERVICE

When contacting Service, ensure that you have the following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Due to the Electrolux policy of continual product development; specifications, colours, and details of our

products and those mentioned in this manual are subject to change without notice.

www.electrolux.com

SOLUTION

Check your home power supply and replug.

CNS

Make sure the blade assembly is fastened

and the jar is locked in the right position of

CNT

blender base.

Contact authorized service centre.

Cut food into smaller pieces or reduce

some food.

Unplug, wait for minimum 20 minutes,

reduce some food, then restart.