Bosch 2 Manual del usuario e instrucciones de instalación - Página 16

Imprimir página

Bosch 2 Manual del usuario e instrucciones de instalación

is highlighted on the display.

Requirement:

Change the cooking time using the

▶

a The appliance applies the change after a few

seconds.

Cancelling the cooking time

You can cancel the cooking time at any time.

is highlighted on the display.

Requirement:

Reset the cooking time to zero using the

▶

a After a few seconds, the appliance applies the

change and continues to heat without a cooking

time.

8.4 Setting the end time

You can delay the time at which cooking is due to fin-

ish by up to 23 hours and 59 minutes.

Notes

¡ The end time cannot be set for types of heating with

grill function.

¡ In order to achieve a good cooking result, do not

delay the end time once the appliance is already in

operation.

¡ Food will spoil if you leave it in the cooking com-

partment too long.

Requirements

¡ A type of heating and a temperature or setting are

set for the main oven ⁠ .

¡ A cooking time is set.

Press the

button repeatedly until

in the display.

Press the

button.

a The display shows the calculated end time.

Use the

button to delay the end time.

a After a few seconds, the appliance applies the set-

ting and the display shows the set end time.

a Once the calculated start time has been reached,

the appliance starts heating up and the cooking

time starts counting down.

a Once the time has elapsed, an audible signal

sounds and the display shows the cooking time as

zero.

When the cooking time has elapsed:

9 Childproof lock

Secure your appliance to prevent children from acci-

dentally switching on the main oven

settings.

Note: After a power cut, the childproof lock is deactiv-

ated.

button.

is highlighted

or changing the

Press any button to end the signal prematurely.

‒

To set another cooking time, press the

‒

When your food is ready, switch off the appli-

‒

ance.

Changing the end time

In order to achieve a good cooking result, you can only

change the set end time before operation starts and

the cooking time starts counting down.

is highlighted on the display.

Requirement:

Use the

button to delay the end time.

▶

a The appliance applies the change after a few

seconds.

Cancelling the end time

You can delete the set end at any time.

is highlighted on the display.

Requirement:

Reset the end time to the current time plus the set

▶

cooking time using the

a After a few seconds, the appliance applies the

change and starts heating up. The cooking time

counts down.

8.5 Setting the time on the clock

Once the appliance has been connected to the mains

or following a power failure, the time flashes on the dis-

play. The time starts at "12:00". Set the current time.

Requirement: The function selector must be set to the

"Off" position ⁠ .

Use the

button to set the time.

Press the

button.

a The time that is set appears on the display.

Changing the time on the clock

You can change the time on the clock at any time.

Requirement: The function selector must be set to the

"Off" position ⁠ .

Press and hold the button until the clock flashes

on the display.

Use the

button to change the time.

a The appliance applies the change after a few

seconds.

9.1 Activating and deactivating the

childproof lock

Requirement: The function selector must be set to the

"Off" position ⁠ .

To activate the childproof lock, press and hold the

▶

button until

appears in the display.

To deactivate the childproof lock, press and hold

‒

the

button until

Childproof lock en

button.

goes out in the display.