Electrolux 5700 series Manual del usuario - Página 13
Navegue en línea o descargue pdf Manual del usuario para Aspiradora Electrolux 5700 series. Electrolux 5700 series 17 páginas. Household type
Imprimir página
To Clear Blockages in Hose
Nested
Wands
NOTE: Turn off the switch and unplug the electrical
cord before clearing hose.
Locate upper hose adapter on the back of the
1
cleaner.
Remove nested wands from back of cleaner for easy
2
access to hose adapter tabs.
Press hose adapter tabs together and pull hose
3
adapter away from cleaner. The hose adapter will
unscrew off hose for easy access to debris if
necessary.
Check for blockages at cleaner opening and in hose.
4
If no blockage is found, continue to step 5. If
blockage is found, clear and continue to step 11.
NOTE: Blockages are not covered under the guarantee.
Any service calls to clear a blockage will be
chargeable.
Hose
Adapter
Tabs
Locate lower hose adapter on the back of the
5
cleaner.
Remove lower hose adapter from rear of cleaner
6
by lifting up and twisting.
Check for blockages in the hose and base hose.
7
Flexing the hose may help loosen any blockage.
If no blockage is found, continue to step 8. If
blockage is found, clear and continue to step
11.
Remove hood from cleaner and check for a
8
blockage in the brush roll area. Make sure the
hose inlet is clear.
After the blockage is found and cleared, replace
9
the hood on the cleaner.
Place lower hose adapter back into the base
10
hose.
Install the upper hose adapter onto the back
11
of the cleaner, line it up with the cleaner
opening and push it against the cleaner until
both tabs lock into place.
Lower
Hose
Adapter
Base
Hose
13