Electrolux 5700 series Manual del usuario - Página 14
Navegue en línea o descargue pdf Manual del usuario para Aspiradora Electrolux 5700 series. Electrolux 5700 series 17 páginas. Household type
Imprimir página
NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM
Motor will not start.
Motor suddenly stops.
Does not clean the carpet
or floor.
No suction at the end of hose.
Noise from the brush roll
area.
Cleaner is hard to push.
Cleaner height knob will
not turn.
Hood will not come off.
Missing parts
Questions?
14
CAUSE
✓
Electric Plug
✓
Thermal Cut Off
✓
Filters
✓
Dust Bag
✓
Hose
✓
Belt
✓
Brush Roll
✓
Hose Adapter
✓
Filters
✓
Hose
✓
Dust Bag
✓
Brush Roll
✓
Belt
✓
Cleaner Height Setting
✓
Belt
✓
Cleaner Height Setting
✓
Cleaner Height Setting
✓
Screws
SOLUTION
Push plug securely into outlet.
Try another outlet.
Check circuit breaker.
Page 6.
Clean or replace the filters. Hint: If picking up fine
dust, the filters may not look dirty but a fine substance
tends to reduce suction when it blocks the airflow
through the filter(s).
Be sure the dust bag is properly seated into the
cleaner body. Page 10.
Replace the dust bag. Page 10.
Be sure hose adapter is secure on back of cleaner.
Page 14.
Remove any blockages from the hose that restrict the
airflow. Page 14.
Check base hose and long hose. Page 14.
Replace a broken, cut, loose or out of shape belt.
Page 13.
Clean hair and thread from bristles and end cap area.
Replace brush roll if bristles are worn. Page 13.
Be sure hose adapter is secure. Page 14.
Clean or replace the filters. Hint: If picking up fine
dust, the filters may not look dirty, but a fine substance
tends to reduce suction when it blocks the airflow
through the filters.
Remove any clogs from the hose that restrict the
airflow. Check base hose and long hose. Page 14.
Replace the dust bag.
Remove hood and clean debris or items from the brush
roll area.
Replace a broken, cut, loose or out of shape belt. Page
13.
Put handle in operating position. Tilt the cleaner back
to raise the front wheels off floor. Then turn the knob to
a higher setting.
Replace a broken, cut, loose or out of shape belt. Page
13.
Hint: Put handle in operating position. Tilt the cleaner
back to raise the front wheels off floor. Then turn the
knob.
Hood cannot be removed from cleaner unless the
cleaner height setting is in the lowest or highest position.
All three screws must be removed from the top of the
hood. Page 13.
Call the Electrolux Floorcare helpline on 08706 055055.
Call the Electrolux Floorcare helpline on 08706 055055.
Have the model and serial numbers ready when you
call. See rating plate beneath the cleaner.