Alert J4X Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Equipos de prueba Alert J4X. Alert J4X 16 páginas. Breath alcohol tester

TAKING A BREATH TEST

To ensure accurate results, insert a new mouthpiece each

time the ALERT J4X tester is used.

Power on the tester and wait until the Ready icon is

displayed.

Blow steadily and continuously into the mouthpiece.

A continuous tone will sound and the port will glow green

to indicate proper breath flow.

If the breath sample is intermittent, too hard or too soft,

two beeps sound and the Abort icon is displayed. Wait

until the Ready icon is displayed and try the test again.

Stop blowing only when the tone ends.

NOTE: A click sound is heard, but continue blowing.

The ALERT J4X tester will analyze the sample and display

the BrAC result in a few seconds.

The sampling port will glow red if the alcohol reading is over

the legal limit.

ATTENTION!

•

Alcohol is present in many products such as breath

sprays, mouthwash and medicines, as well as in

certain foods and beverages, which may distort the

BrAC result

•

Before testing, wait 20 minutes after eating or

drinking and 3 minutes after smoking

ALERT J4X