Bose CINEMATE 1 SR Manual de instalación - Página 19
Navegue en línea o descargue pdf Manual de instalación para Sistema de cine en casa Bose CINEMATE 1 SR. Bose CINEMATE 1 SR 20 páginas. Home theater speaker system
También para Bose CINEMATE 1 SR: Manual de instrucciones (16 páginas), Manual de instrucciones (44 páginas), Manual de instalación (40 páginas)
Imprimir página
F. Follow the audible instructions given to you by the system.
Note: After hearing the language prompt in English, you can press the ADAPTiQ button to
select another language. Then press the volume up button to continue.
Note: After you select your language and press the volume up button to continue, you can
go back to the beginning of the process at any time by pressing the ADAPTiQ button.
G. When the process is done, unplug the ADAPTiQ headset from the speaker array and
store it in a safe place.
H. Put the ADAPTiQ connector cover back in place.
When would I need to run the ADAPTiQ calibration process again?
• If you rearrange the furniture in the room or place any speaker system
component in a different location or orientation.
• If you move the speaker system to a different room.
Step 3:
Turn off the speakers in your TV
To enjoy the full benefit of hearing TV audio through the CineMate
internal speakers in your TV should be turned off. Newer TVs usually have a setup menu
item for turning off speakers. Older TVs may have a speaker on/off switch on the rear
panel near the audio output connectors.
• If you have a TV with a setup menu, use the remote that came with your TV to locate
the menu item and set the TV speakers to off. If your TV does not have a menu setting
for turning off the internal speakers, exit the audio menu and reduce the TV volume to
its lowest setting.
• If the rear panel of your TV has a speaker on/off switch, set it to the off position and
adjust the TV volume to about 80% of the highest volume.
• If your TV has a variable audio output, the TV volume may need to be turned up
enough to hear sound from the speaker array.
Note: To confirm your TV speakers are off, press Mute on the Bose remote and check that
no sound is coming from the TV.
Step 4:
Use your CineMate
operating guide
See your operating guide for instructions on basic functions, programming the remote,
and troubleshooting.
®
®
1 SR
S
S
YSTEM
ETUP
1 SR system, the
English – 19