Bose CINEMATE 1 SR Setup Manual - Page 19

Browse online or download pdf Setup Manual for Home Theater System Bose CINEMATE 1 SR. Bose CINEMATE 1 SR 20 pages. Home theater speaker system
Also for Bose CINEMATE 1 SR: Operating Manual (16 pages), Operating Manual (44 pages), Setup Manual (40 pages)

Print Page

F. Follow the audible instructions given to you by the system.

Note: After hearing the language prompt in English, you can press the ADAPTiQ button to

select another language. Then press the volume up button to continue.

Note: After you select your language and press the volume up button to continue, you can

go back to the beginning of the process at any time by pressing the ADAPTiQ button.

G. When the process is done, unplug the ADAPTiQ headset from the speaker array and

store it in a safe place.

H. Put the ADAPTiQ connector cover back in place.

When would I need to run the ADAPTiQ calibration process again?

• If you rearrange the furniture in the room or place any speaker system

component in a different location or orientation.

• If you move the speaker system to a different room.

Step 3:

Turn off the speakers in your TV

To enjoy the full benefit of hearing TV audio through the CineMate

internal speakers in your TV should be turned off. Newer TVs usually have a setup menu

item for turning off speakers. Older TVs may have a speaker on/off switch on the rear

panel near the audio output connectors.

• If you have a TV with a setup menu, use the remote that came with your TV to locate

the menu item and set the TV speakers to off. If your TV does not have a menu setting

for turning off the internal speakers, exit the audio menu and reduce the TV volume to

its lowest setting.

• If the rear panel of your TV has a speaker on/off switch, set it to the off position and

adjust the TV volume to about 80% of the highest volume.

• If your TV has a variable audio output, the TV volume may need to be turned up

enough to hear sound from the speaker array.

Note: To confirm your TV speakers are off, press Mute on the Bose remote and check that

no sound is coming from the TV.

Step 4:

Use your CineMate

operating guide

See your operating guide for instructions on basic functions, programming the remote,

and troubleshooting.

1 SR

YSTEM

ETUP

1 SR system, the

English – 19