Advanced Radio Smart Switch Manual de inicio rápido - Página 10

Navegue en línea o descargue pdf Manual de inicio rápido para Control Panel Advanced Radio Smart Switch. Advanced Radio Smart Switch 15 páginas.

Step 4

This is the battery setup screen. Using the arrows

(<, >)next to Bat Chemistry cycle through until you

see the chemistry you are using with the switch.

The Smart Switch works with both 2S (6.0V—8.4v)

and 3S (10.8—12.8V) packs The Options are Lipo,

Li-ion, Life, NiCd, NiMH.

Note: When setting the chemistry, ensure you

select the correct voltage and chemistry, other-

wise you will get a false low voltage warning (see

page 11).

Step 5

Using the

and

capacity shown on your battery packs.

Note: Step 5 is extremely important, Please en-

sure the capacity is set correctly to the battery

packs you are using.

Step 6

Once you have set these up, press the RETURN

button to take you back to the main menu. Press

RETURN again to go back to the Smart Screen.

You have successfully setup the Smart Switch.

Important

The Smart display shows how much capacity you have left using the battery indicators on

the left and right of the battery screen It is important that the capacity you enter is correct

and accurate. If you are unsure about the capacity of your batteries or if your packs are not

new. We recommend cycling your packs by discharging them and recharging them to full.

This will give you the best possible result for the battery packs you are using.

buttons, set the capacity to the