Bose VideoWave III Manual de instrucciones - Página 28
Navegue en línea o descargue pdf Manual de instrucciones para Sistema de cine en casa Bose VideoWave III. Bose VideoWave III 38 páginas. Bose soundtouch wireless adapter owner's guide
También para Bose VideoWave III: Manual de instalación (20 páginas), Manual del usuario (14 páginas)
Imprimir página
Changing Your System Setup
Source setup
A setup function will appear in the menu for each connected
device using the name assigned to it during the initial setup
process. For example, you might see "Cable Setup," "Satellite
Setup," or "DVD Setup." This function is available only after the
initial setup is completed.
This function allows you to:
• Change the name of a connected device
• Set up the remote control
• Manually enter remote control IR device codes
• Customize controls appearing in the control frame
(see "Customizing the control frame" on page 29)
• Disable or enable automatic device power on/off
• Remove this device
• Add or change video or audio connections
Add a new device
This function guides you through the process of connecting a
new device to the system. It will help you to choose the right
cable and input, and to program the click pad remote to operate
the device. This function is available only after the initial setup
is completed.
28 - English
Update
This function guides you through the process of updating the
software in your VideoWave entertainment system. By using a
computer with an Internet connection, system software updates
from Bose can be downloaded to the USB drive that is included
with your system. Be sure to carefully follow the instructions
displayed on the VideoWave monitor.
Teach mode
This function shows you how to program a third-party learning
remote to control your VideoWave system. When in this mode,
the VideoWave system transmits an infrared (IR) code for each
button pressed on the click pad remote control. The third-party
remote learns how to control your system by recording these
codes. Follow the instructions displayed on the VideoWave
monitor. To exit this mode, press the Setup button on the control
console. This function is available only after the initial setup is
completed.
Exit Unify
®
Closes the menu and returns you to the last source selected.