Bose VideoWave III 운영 매뉴얼 - 페이지 28

{카테고리_이름} Bose VideoWave III에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose VideoWave III 38 페이지. Bose soundtouch wireless adapter owner's guide
Bose VideoWave III에 대해서도 마찬가지입니다: 설정 매뉴얼 (20 페이지), 소유자 매뉴얼 (14 페이지)

페이지 인쇄

Changing Your System Setup

Source setup

A setup function will appear in the menu for each connected

device using the name assigned to it during the initial setup

process. For example, you might see "Cable Setup," "Satellite

Setup," or "DVD Setup." This function is available only after the

initial setup is completed.

This function allows you to:

• Change the name of a connected device

• Set up the remote control

• Manually enter remote control IR device codes

• Customize controls appearing in the control frame

(see "Customizing the control frame" on page 29)

• Disable or enable automatic device power on/off

• Remove this device

• Add or change video or audio connections

Add a new device

This function guides you through the process of connecting a

new device to the system. It will help you to choose the right

cable and input, and to program the click pad remote to operate

the device. This function is available only after the initial setup

is completed.

28 - English

Update

This function guides you through the process of updating the

software in your VideoWave entertainment system. By using a

computer with an Internet connection, system software updates

from Bose can be downloaded to the USB drive that is included

with your system. Be sure to carefully follow the instructions

displayed on the VideoWave monitor.

Teach mode

This function shows you how to program a third-party learning

remote to control your VideoWave system. When in this mode,

the VideoWave system transmits an infrared (IR) code for each

button pressed on the click pad remote control. The third-party

remote learns how to control your system by recording these

codes. Follow the instructions displayed on the VideoWave

monitor. To exit this mode, press the Setup button on the control

console. This function is available only after the initial setup is

completed.

Exit Unify

Closes the menu and returns you to the last source selected.