Bose Lifestyle Music Center Manual de instrucciones - Página 34

Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Bose Lifestyle Music Center. Bose Lifestyle Music Center 42 páginas. Home entertainment systems with vs-2 video enhancer
También para Bose Lifestyle Music Center: Manual de instrucciones (48 páginas), Manual de instrucciones (48 páginas), Manual de instalación (38 páginas), Manual del usuario (19 páginas), Manual del usuario (29 páginas), Manual de instalación (44 páginas), Manual del usuario (42 páginas), Información de configuración (1 páginas), Manual del usuario (26 páginas), Manuales de expansión (38 páginas), Manual de instrucciones (48 páginas), Manual de instrucciones (46 páginas), Manual del usuario (12 páginas), Manual de inicio rápido (8 páginas), Manual de instalación (30 páginas), Manual de instalación (39 páginas)

Imprimir página
Bose Lifestyle Music Center Manual de instrucciones
Changing
the house
code
settings
Each Lifestyle ®remote control uses a system of matching house codes to communicate
with
its corresponding
media center. If commands given from your remote ever conflict with those
of another nearby Lifestyle ®system, you can easily set a new house code for your system and
its remote control(s) by doing the following:
1.
Open the remote control battery cover and locate the miniature switches (Figure 14).
2.
Change the position of switches 1,2, 3, or 4 by moving them in the opposite direction
from their current settings. Use a paper clip, ball point pen, or similar object.
Note: DO NOT change any other switch settings. Moving other switches may cause your
remote to not control your system.
3.
Replace the battery cover.
4.
Lift the media center door and press the All Off button.
5.
Press and hold the Store key. Your current house code will appear in the media center
display window in the form of four rectangles which represent the positions of switches 1
through 4:
HOUSECODE:
Current house code = 0 0 0 0
(Switches 1 - 4 down.)
.
While holding the Store key, press any key on the remote control. The display will change
to show the new house code to confirm recognition of the new code:
NEWHOUSECODE: --_--_
New house code = 1 0 1 0
(Switch 1 up, 2 down, 3 up, 4 down.)
Figure
14
Miniature house code
switches
7.
Release the Store key. The system remains off.
8.
If you have additional remote controls, change the switches to match those of the first
remote control. It is not necessary to repeat steps 4-8.
Note:
To verify your system's house code, press Store while the system is off. The display
confirms the settings of switches
1-4.
House code switches (1-4).
Shown as set at the factory:
all switches down.
32