Bose Lifestyle Music Center Panduan Pengoperasian - Halaman 34

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem stereo Bose Lifestyle Music Center. Bose Lifestyle Music Center 42 halaman. Home entertainment systems with vs-2 video enhancer
Juga untuk Bose Lifestyle Music Center: Panduan Pengoperasian (48 halaman), Panduan Pengoperasian (48 halaman), Panduan Instalasi (38 halaman), Panduan Pemilik (19 halaman), Panduan Pemilik (29 halaman), Panduan Instalasi (44 halaman), Panduan Pemilik (42 halaman), Informasi Pengaturan (1 halaman), Panduan Pemilik (26 halaman), Panduan Ekspansi (38 halaman), Panduan Pengoperasian (48 halaman), Panduan Pengoperasian (46 halaman), Panduan Pemilik (12 halaman), Panduan Memulai Cepat (8 halaman), Panduan Instalasi (30 halaman), Panduan Instalasi (39 halaman)

Changing

the house

code

settings

Each Lifestyle ®remote control uses a system of matching house codes to communicate

with

its corresponding

media center. If commands given from your remote ever conflict with those

of another nearby Lifestyle ®system, you can easily set a new house code for your system and

its remote control(s) by doing the following:

Open the remote control battery cover and locate the miniature switches (Figure 14).

Change the position of switches 1,2, 3, or 4 by moving them in the opposite direction

from their current settings. Use a paper clip, ball point pen, or similar object.

Note: DO NOT change any other switch settings. Moving other switches may cause your

remote to not control your system.

Replace the battery cover.

Lift the media center door and press the All Off button.

Press and hold the Store key. Your current house code will appear in the media center

display window in the form of four rectangles which represent the positions of switches 1

through 4:

HOUSECODE:

Current house code = 0 0 0 0

(Switches 1 - 4 down.)

While holding the Store key, press any key on the remote control. The display will change

to show the new house code to confirm recognition of the new code:

NEWHOUSECODE: --_--_

New house code = 1 0 1 0

(Switch 1 up, 2 down, 3 up, 4 down.)

Figure

Miniature house code

switches

Release the Store key. The system remains off.

If you have additional remote controls, change the switches to match those of the first

remote control. It is not necessary to repeat steps 4-8.

Note:

To verify your system's house code, press Store while the system is off. The display

confirms the settings of switches

1-4.

House code switches (1-4).

Shown as set at the factory:

all switches down.