Bose SoundTouch Manual de servicio - Página 31

Navegue en línea o descargue pdf Manual de servicio para Media Converter Bose SoundTouch. Bose SoundTouch 39 páginas. Wireless pedestal
También para Bose SoundTouch: Manual del usuario (33 páginas), Manual del usuario (32 páginas), Manual de inicio rápido (2 páginas), Manual (9 páginas), Manual del usuario (20 páginas), Manual del usuario (32 páginas), Manual de inicio rápido (5 páginas), Manual Start Here (20 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (18 páginas), Manual de inicio rápido (5 páginas), Manual de inicio rápido (2 páginas)

Imprimir página

DISASSEMBLY PROCEDURES

Note: Refer to the figure below for the

following procedures.

1. Top Cover Removal

1.1 With the unit upside down, remove the

six screws (15) on the bottom of the unit that

secure the top cover (1) to the base (2).

1.2 Turn the unit back over and lift off the top

cover.

Note: Service replacement top covers

include the front bezel that is adhered to the

front of the top cover. The part number is

located on the main parts list.

2. Input/Output PCB Assembly Removal

2.1 Perform procedure 1.

2.2 Disconnect the Bose

J201 on the I/O PCB (8). Disconnect the two

ribbon cables (6,17) at J200 and J300 that

run to the Wi-Fi Module PCB (7).

2.3 Remove the two screws that secure the

I/O PCB assembly to the base. Lift out the

I/O PCB assembly.

Link cable (4) from

5x 3

4x 9

Note: Be sure to retain the scrims that

cover the connectors and the reset button

from the old I/O PCB for re-use.

3. Wi-Fi Module PCB Removal

3.1 Perform procedure 1.

3.2 Disconnect the two ribbon cables (6,17)

at J1203 and J1201 that run to the I/O PCB

(8) assembly.

3.3 Remove the three screws that secure

the Wi-Fi PCB (7) assembly to the base.

Lift out the Wi-Fi PCB.

4. Enclosure Base Removal

4.1 Perform procedure 1.

4.2 Remove the I/O (8) and Wi-Fi Module

PCB (7) assemblies using procedures 2

and 3. You can now replace the base (2).

Note: The Service replacement enclosure

base is supplied with the Bose Link cable,

rear panel I/O label and feet attached as a

Service subassembly. Refer to the main

parts list for the part number.

15 6x