Bose Lifestyle SA-3 Manual - Página 2

Navegue en línea o descargue pdf Manual para Amplificador Bose Lifestyle SA-3. Bose Lifestyle SA-3 34 páginas. Bose stereo amplifier owner's guide sa-2, sa-3
También para Bose Lifestyle SA-3: Manual del usuario (32 páginas), Teoría de funcionamiento (4 páginas)

Imprimir página

1. Parts that have special safety characteristics are identified by the

or by special notes on the parts list. Use only replacement parts that have critical characteristics

recommended by the manufacturer.

2. Make leakage current or resistance measurements to determine that exposed parts are

acceptably insulated from the supply circuit before returning the unit to the customer. Refer to

UL6500 clause 9.1.1. Use the following checks to perform these measurements:

A. Leakage Current Hot Check-With the unit completely reassembled, plug the AC line cord

directly into a 120V AC outlet. (Do not use an isolation transformer during this test.) Use a leak-

age current tester or a metering system that complies with American National Standards Institute

(ANSI) C101.1 "Leakage Current for Appliances" and Underwriters Laboratories (UL) 6500. With

the unit AC switch first in the ON position and then in OFF position, measure from a known earth

ground (metal waterpipe, conduit, etc.) to all exposed metal parts of the unit (antennas, handle

bracket, metal cabinet, screwheads, metallic overlays, control shafts, etc.), especially any

exposed metal parts that offer an electrical return path to the chassis. Any current measured

must not exceed 0.5 milliamp. Reverse the unit power cord plug in the outlet and repeat test.

ANY MEASUREMENTS NOT WITHIN THE LIMITS SPECIFIED HEREIN INDICATE A POTEN-

TIAL SHOCK HAZARD THAT MUST BE ELIMINATED BEFORE RETURNING THE UNIT TO THE

CUSTOMER.

B. Insulation Resistance Test Cold Check-(1) Unplug the power supply and connect a jumper

wire between the two prongs of the plug. (2) Turn on the power switch of the unit. (3) Measure

the resistance with an ohmmeter between the jumpered AC plug and each exposed metallic

cabinet part on the unit. When the exposed metallic part has a return path to the chassis, the

reading should be between 1 and 5.2 Megohms. When there is no return path to the chassis, the

reading must be "infinite". If it is not within the limits specified, there is the possibility of a shock

hazard, and the unit must be repaired and rechecked before it is returned to the customer.

ELECTROSTATIC DISCHARGE SENSITIVE (ESDS)

This unit contains ESDS devices. We recommend the following precautions when repairing,

replacing or transporting ESDS devices:

• Perform work at an electrically grounded work station.

• Wear wrist straps that connect to the station or heel straps that connect to conductive

floor mats.

• Avoid touching the leads or contacts of ESDS devices or PC boards even if properly

grounded. Handle boards by the edges only.

• Transport or store ESDS devices in ESD protective bags, bins, or totes. Do not insert

unprotected devices into materials such as plastic, polystyrene foam, clear plastic bags,

bubble wrap or plastic trays.

The Bose

Lifestyle

SA-2 and SA-3 amplifiers are covered by a limited one year transferable warranty.

SAFETY INFORMATION

DEVICE HANDLING

WARRANTY

symbol on schematics