DROPSA LOCOPUMP Manual de uso y mantenimiento - Página 3

Navegue en línea o descargue pdf Manual de uso y mantenimiento para Bomba de agua DROPSA LOCOPUMP. DROPSA LOCOPUMP 11 páginas. Pneumatic grease pump

5. PUMP COMPONENTS

All the main pump components are fixed to the mounting bracket.

Oil Reservoir: constructed in transparent plastic and compatible with commercial lubricants.

Pump Assembly: constructed in steel and containing a non-return valve. At the working pressure of 300

bar (4410 Psi), the pump can deliver up to 2 cm³ (0.12 cu.in.) per stroke.

Electric Level Control-Switch: Provides remote low level sensing. The switch can be set to either

operate normally open (N.O.) or normally close (N.C.). Standard configuration is N.C.

CODE

DESCRIPTION

3044260

Reservoir 2 Kg (4.4 lb.)

3045202

Mounting bracket

3413500

Pump body

1655183

Electric Level Control-Switch

712100

Re-filling filter

6. UNPACKING AND INSTALLING THE PUMP

WARNING: The unit can only be opened and repaired by authorized Dropsa personnel.

6.1 UNPACKING.

Once a suitable location has been found to install the unit remove the pump from the packaging. Check the

pump has not been damaged during transportation or storage. No particular disposal procedures are necessary

as packaging materials are no dangerous for health or environment. However, packaging should be disposed of

in accordance with regulations that may be in force in your area or state.