DROPSA LOCOPUMP Panduan Pengguna dan Pemeliharaan - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna dan Pemeliharaan untuk Pompa Air DROPSA LOCOPUMP. DROPSA LOCOPUMP 11 halaman. Pneumatic grease pump
Halaman Cetak
5. PUMP COMPONENTS
All the main pump components are fixed to the mounting bracket.
Oil Reservoir: constructed in transparent plastic and compatible with commercial lubricants.
Pump Assembly: constructed in steel and containing a non-return valve. At the working pressure of 300
bar (4410 Psi), the pump can deliver up to 2 cm³ (0.12 cu.in.) per stroke.
Electric Level Control-Switch: Provides remote low level sensing. The switch can be set to either
operate normally open (N.O.) or normally close (N.C.). Standard configuration is N.C.
CODE
DESCRIPTION
3044260
Reservoir 2 Kg (4.4 lb.)
3045202
Mounting bracket
3413500
Pump body
1655183
Electric Level Control-Switch
712100
Re-filling filter
6. UNPACKING AND INSTALLING THE PUMP
WARNING: The unit can only be opened and repaired by authorized Dropsa personnel.
6.1 UNPACKING.
Once a suitable location has been found to install the unit remove the pump from the packaging. Check the
pump has not been damaged during transportation or storage. No particular disposal procedures are necessary
as packaging materials are no dangerous for health or environment. However, packaging should be disposed of
in accordance with regulations that may be in force in your area or state.
3