anko FW-45M Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Ventilador anko FW-45M. anko FW-45M 12 páginas. Tripod fan

Imprimir página
anko FW-45M Manual del usuario

3.3 Safety Grille and Fan Blade

To assemble the safety grille and blade assembly, first remove the 4 screws from the
motor assembly and as identified.
Fit the rear safety grille into position (with the handle on the back of the grille at the top)
and refit the 4 screws and tighten.
Remove the protective plastic sleeve from the motor spindle shaft and discard.
Next, rotate the motor spindle until the area with the "flat" surface is facing up.
Slide the fan blade onto the spindle ensuring the screw is lined up with the "flat" surface
on the spindle as shown.
Push on until the end of the spindle is flush with the end of the fan blade hole, then
tighten the screw.
Fan Blade Screw
"Flat" surface on
Motor Spindle
Page 8 of 12
Fan Blade hole flush
with Motor Spindle