3M TN252 Instrucciones de seguridad y montaje - Página 2

Navegue en línea o descargue pdf Instrucciones de seguridad y montaje para Instrumentos de medida 3M TN252. 3M TN252 8 páginas. Wheel weight system

Technical Update

3M™ Wheel Weight System TN2000 – Safety and Instructions

Page 2 of 8

Safety

(Continued)

To reduce the risks associated with the sharp cutting blade, which, if not

avoided, could result in serious injury:

Prior to use, read, understand, follow and retain for future reference the

safety information in these user instructions.

Sharp edge (labels on the cutter).

Do not use with a damaged or missing cutting blade guard.

Always latch the cutter handles closed when not in use.

Keep hands away from cutting area.

Handle replacement cutter blades with care when replacing and disposing of

them.

To reduce the risks associated with impact, which, if not avoided, may

result in minor or moderate injury and/or property damage:

Locate and operate the cutter tool and stand in an area where it will not be

bumped into.

Cutter stand foot pads must be securley fastened.

Ensure the box holder set screws are secure prior to use.

Ensure the locking collar on the upper stand arm for the double box holder

kit is in place, is not damaged and is secure prior to use.

Ensure the upper-stand to lower-stand locking bolt is not damaged and

secure prior to use.

Ensure the cutter is properly mounted to the upper stand, is not damaged

and the fastener is secure prior to use.

Ensure that the added box holder for the dual feed kit is properly mounted,

that both the front and back detents are engaged and that no more than two

box holders are mounted to the stand prior to use.

WARNING

CAUTION