3M TN252 Safety And Set-Up Instructions - Page 2
Browse online or download pdf Safety And Set-Up Instructions for Measuring Instruments 3M TN252. 3M TN252 8 pages. Wheel weight system
Print PageTechnical Update
3M™ Wheel Weight System TN2000 – Safety and Instructions
Page 2 of 8
Safety
(Continued)
To reduce the risks associated with the sharp cutting blade, which, if not
avoided, could result in serious injury:
Prior to use, read, understand, follow and retain for future reference the
safety information in these user instructions.
Sharp edge (labels on the cutter).
Do not use with a damaged or missing cutting blade guard.
Always latch the cutter handles closed when not in use.
Keep hands away from cutting area.
Handle replacement cutter blades with care when replacing and disposing of
them.
To reduce the risks associated with impact, which, if not avoided, may
result in minor or moderate injury and/or property damage:
Locate and operate the cutter tool and stand in an area where it will not be
bumped into.
Cutter stand foot pads must be securley fastened.
Ensure the box holder set screws are secure prior to use.
Ensure the locking collar on the upper stand arm for the double box holder
kit is in place, is not damaged and is secure prior to use.
Ensure the upper-stand to lower-stand locking bolt is not damaged and
secure prior to use.
Ensure the cutter is properly mounted to the upper stand, is not damaged
and the fastener is secure prior to use.
Ensure that the added box holder for the dual feed kit is properly mounted,
that both the front and back detents are engaged and that no more than two
box holders are mounted to the stand prior to use.
WARNING
CAUTION