3M TN252 Safety And Set-Up Instructions

Browse online or download pdf Safety And Set-Up Instructions for Measuring Instruments 3M TN252. 3M TN252 8 pages. Wheel weight system

Print Page

Wheel Weight System TN2000

Safety and Set-Up Instructions for the 3M™ Cutting Stand

TN252 (PN61480), 3M™ Universal Cutter TN201 (PN61479),

3M™ Dual Box Holder Kit TN222 (PN99428) and 3M™ Dual

Cutter Bracket TN211 (PN99429)

Technical Bulletin

Read, understand and follow all safety information contained in these instructions

Safety Statement

prior to setup and operation of the 3M™ Cutting Stand TN252 (PN61480), 3M™

Universal Cutter TN201 (PN61479), 3M™ Dual Box Holder Kit TN222

(PN99428), and the 3M™ Dual Cutter Bracket TN211 (PN99429) for the 3M™

Wheel Weight System TN2000. Retain these instructions for future reference.

Intended Use

The 3M Cutting Stand TN252 (PN61480) and 3M Universal Cutter TN201

(PN61479) are intended for use in handling, feeding, measuring and cutting

required lengths of 3M™ Wheel Weight TN2015 (PN61403), TN2023 (PN61405)

and TN4014 (PN99427) roll goods for use in the balancing of automotive wheels.

The 3M™ Wheel Weight System TN2000 is used in a commercial environment by

trained personnel.

The 3M Wheel Weight System must be set up and operated in the commercial

automotive environment as intended. It has not been evaluated for other uses

or locations.

Safety

EXPLANATION OF SIGNAL WORD CONSEQUENCES

Indicates a potentially hazardous situation, which, if

WARNING:

not avoided, could result in death or serious injury

and/or property damage.

Indicates a potentially hazardous situation, which, if

CAUTION:

not avoided, may result in minor or moderate injury

and/or property damage.

November 2008