Anova MG3514 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Motosierra Anova MG3514. Anova MG3514 19 páginas.

• Do not use a chain that is damaged, poorly adjusted, or not fully and securely mounted. Make sure

the chain stops moving when the throttle control trigger is released.

• Shut off the engine before adjusting the chain saw. Before refueling, repairing, or transporting the

chain saw, turn off the engine.

• Keep handles dry, clean and free of oil or fuel mixture.

• Use the chain saw only in well-ventilated areas. Do not run the engine indoors.

Exhaust gases contain harmful carbon monoxide.

• Protect yourself against kickback. Kickback can lead to dangerous loss of control of the chain saw.

• Metal parts reach high temperatures immediately after stopping the engine.

• Never use the machine...

1. When the floor is slippery or when other conditions exist that might make it impossible to maintain

a stable posture.

2. At night, in times of heavy fog, or any other time your field of vision may be limited. During rain

storms, during lightning storms, at times of high winds, or any other time weather conditions may

make it unsafe to use this product.

3. With a damaged or poorly adjusted chain or that is not completely and securely assembled. Make

sure the saw chain stops moving when the throttle control trigger is released. Never adjust the guide

bar or saw chain when the engine is running.

4. Under the influence of alcohol, when you are exhausted/deprived of sleep, when you are drowsy

as a result of taking medication, or at any other time when your judgment may be impaired.

Lack of sleep, tiredness or physical exhaustion results in a lower level of attention, and this in turn

leads to accidents and injuries. For all these reasons, we recommend that you limit the amount of

time you use the machine continuously to around 10 minutes per session, and take 10-20 minutes

of rest between work sessions. Also try to keep the total amount of work done in a single day under

2 hours or less.

When using the machine remember to wear proper clothing and protective equipment: Hard hat,

goggles or face shield, thick work gloves, non-slip work boots, ear protectors and must be carried

with you.