Foxpro SNOW COMMANDO Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Sistema de conferencias Foxpro SNOW COMMANDO. Foxpro SNOW COMMANDO 19 páginas.

Imprimir página
5.
After moving the highlight bar to the sound you wish to play, push the "Select" button a single
time to begin playback. Your selected sound will begin playing at low volume.
6.
To adjust the volume: Use the "Volume Up" button to raise the volume level to your desired
setting. Use the "Volume Down" button to decrease the volume level. The transmitter has 20
volume steps.
7.
To silence the sound: Push the "Mute" button a single time. When muted, the mute status
indicator on the TX433 display shows an "M" and the current sound is silenced. Un-muting is
accomplished by pushing the "Mute" button a second time (the "M" will no longer be displayed
and the sound will resume playing).
8.
To switch sounds: Use the scroll buttons to navigate to a different sound and push the "Select"
button. You can switch sounds while the Snow Commando is actively playing a sound or while
muted.
9.
To turn off the TX433: Push and hold the power button for approximately 1-2 seconds. Be aware
that turning off the remote control does not end sound playback on the Snow Commando. If you
are finished calling, use the "Mute" button to silence the Snow Commando prior to turning off
the TX433.
10. To turn off the Snow Commando: Flip the power switch to the off position. The pilot LED will
extinguish.

2-5 Favorites

The TX433 allows you to establish a list consisting of 10 of your most frequently used sounds under the
"Favorites" menu. These "Favorites" allow for quick selection of your favorite sounds at your
predetermined volume level. This section describes the process involved in creating, changing, and using
your presets.
Creating New Favorites
1.
Select the "Favorites" menu item on the TX433. If this is your first time working with favorites,
favorite 1 is automatically set to Coyote Pup Distress 3 at volume 10.
2.
To set a preset, position the black highlight bar on one of the blank preset slots and push the
"Select" button a single time.
3.
The first step is selecting the sound you wish to use. Use "Sound Up" or "Sound Down" buttons
to navigate through your sound list and locate the desired sound. Once found, push the "Select"
button to set the sound.
4.
Next, select the volume level that you wish to use for this favorite. This is done by using the
"Volume Up" or "Volume Down" arrow button. After you have found your desired volume level,
push the "Select" button to set the volume level. This will complete setting up your Favorite.
5.
You will notice that the slot you assigned this favorite to now displays the sound name and the
volume level for reference.
Changing/Overwriting Existing Favorite
1.
Select the "Favorites" menu item on the TX433.
2.
Position the highlight bar on the favorite that you wish to change.
3.
Push and hold the "Select" button for about 3-4 seconds. Repeat the steps for Creating a New
Favorite.
Using a Favorite
1.
Select the "Favorites" menu item on the TX433.
2.
Position the highlight bar on the preset that you wish to activate.
3.
Push the "Select" button a single time to begin playback. The Snow Commando will begin playing
the selected sound at the preset volume level.
7