Foxpro SNOW COMMANDO Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Sistema de conferencias Foxpro SNOW COMMANDO. Foxpro SNOW COMMANDO 19 páginas.
Imprimir páginaUsing External Speakers
The Snow Commando is equipped with an external speaker jack which allows you to connect an additional
speaker. By connecting a second speaker to the Snow Commando, you can direct the sound to a wider area,
increasing your chances of having an animal hear it. You can find a complete selection of external speakers
on the FOXPRO website. The external speaker jack on your Snow Commando accepts a standard ¼" plug.
When selecting an external speaker, be sure to use one with an impedance rating of 8-ohms. Be sure the
Snow Commando is turned OFF before connecting an external speaker! To connect an external speaker,
plug the connector of the external speaker into the external speaker jack on the side of the Snow
Commando.
TX433 Transmitter Detailed Information
This section covers the TX433 in detail including breakdowns and explanations of each menu item.
5-1 Primary Display Area
When powered on, the TX433 briefly displays a
startup screen (firmware version) and then goes
straight to the primary display area (see image to
the right). The "Favorites" menu item holds your
10 favorite sounds. Below "Favorites" are your
various sound categories. The bottom line of the
display is a status bar that shows (in order):
current volume level, mute status, battery level,
and elapsed timer. You navigate through the
screen with the "Scroll Up" and "Scroll Down"
buttons. As you scroll, the black highlight bar moves up and down, respectively. To select a menu item, push
the "Select" button. To move back to the previous screen after making a selection, use the "Back/Menu"
button.
5-2 Main Menu
The main menu provides access to a variety of transmitter configurations. To access the main menu, push
the "Back/Menu" button a single time. The available menu options are as follows: "Sound Settings,"
"Display/Power," "Timer/User," and "Remote Settings." The following sections cover each of these menu
items and their sub-menu items in detail.
5-3 Sound Settings: Volume Step
The TX433 has a range of volume steps from 0 – 20. Increasing the volume in the field by increments of 1
may be too slow for some, therefore, this stepping value is configurable. You can choose from 1, 2, and 3.
To change the volume step value, highlight the "Volume Step" menu item, push the "Select" button, then
use the "Sound Up" or "Sound Down" scroll buttons to cycle through the options. When the desired option
is set, push "Select" a final time to lock it in. The value assigned to the Volume Step option will be
remembered between power cycles.
5-4 Sound Settings: Play Mode
This menu allows you to specify which mode of sound playback the Snow Commando operates on. The
available options are: repeat, single play, and jukebox. The default setting is repeat. In Repeat mode, the
Snow Commando will play the selected sound repeatedly until you interrupt it. In Single play mode the
sound will play a single time, then stop. In Jukebox mode the sounds play a single time, incrementally. The
Play Mode setting is NOT stored between power cycles. You will need to change this setting each time you
power on the Snow Commando remote.
5-5 Sound Settings: Fav Mute OR
During normal operation, if the Snow Commando is muted and you request to play a favorite, the sound is
queued for playback, but it cannot be heard until the caller is un-muted. Favorite mute override will take
8