Attonic AD-TM50 Manual de instrucciones - Página 13

Navegue en línea o descargue pdf Manual de instrucciones para Instrumentos de medida Attonic AD-TM50. Attonic AD-TM50 20 páginas.

7-11.Set buzzer　BP　(Initial Setting: ON)

・Set whether to sound the buzzer or not.

　The buzzer gives a warning during the main body operation or various settings.

　When the buzzer sound is annoying, you can turn it off to silence the sound.

* You can switch ON / OFF repeatedly by pressing the "DAT" switch.

* Short press the "FUN" switch to confirm the setting. Next is the setting for backlight.

* The following is a list of buzzer sounds.

Action

Overload

Comparator　ＨＩ

Comparator　ＬＯ

Switch operation

7-12.Set backlight　BL　(Initial Setting: OFF）

・Turn the backlight ON / OFF.

Turn on the backlight when using in a dark place. The backlight will brighten the screen and make it easier to see.

* When the backlight is ON, it consumes a lot of battery power and shortens the usage time.

* You can switch ON / OFF repeatedly by pressing the "DAT" switch.

* Short press the "FUN" switch to confirm the setting. Next is the setting for polarity.

7-13.Set polarity　IN　(Initial Setting: OFF）

・When OFF, right rotation is set to + and left rotation is set to -, but when ON, right rotation is set to - and left

rotation is set to +.

* You can switch ON / OFF repeatedly by pressing the "DAT" switch.

* Short press the "FUN" switch to confirm the setting. Next is the setting for reset to Initial Setting.

The display changes every

time the "DAT" switch is

pressed.

Sound

Remove the load and press "RES"

Continuous sound

Intermittent sound

Remove the load and press "RES"

(fast)

Intermittent sound

Remove the load and press "RES"

(slow)

Short sound

The display changes every

time the "DAT" switch is

pressed.

The display changes every

time the "DAT" switch is

pressed.

The way to stop buzzer

switch.