Attonic AD-TM50 Manual de operação - Página 13

Procurar online ou descarregar pdf Manual de operação para Instrumentos de medição Attonic AD-TM50. Attonic AD-TM50 20 páginas.

Attonic AD-TM50 Manual de operação
7-11.Set buzzer BP (Initial Setting: ON)
・Set whether to sound the buzzer or not.
 The buzzer gives a warning during the main body operation or various settings.
 When the buzzer sound is annoying, you can turn it off to silence the sound.
* You can switch ON / OFF repeatedly by pressing the "DAT" switch.
* Short press the "FUN" switch to confirm the setting. Next is the setting for backlight.
* The following is a list of buzzer sounds.
Action
Overload
Comparator HI
Comparator LO
Switch operation
7-12.Set backlight BL (Initial Setting: OFF)
・Turn the backlight ON / OFF.
Turn on the backlight when using in a dark place. The backlight will brighten the screen and make it easier to see.
* When the backlight is ON, it consumes a lot of battery power and shortens the usage time.
* You can switch ON / OFF repeatedly by pressing the "DAT" switch.
* Short press the "FUN" switch to confirm the setting. Next is the setting for polarity.
7-13.Set polarity IN (Initial Setting: OFF)
・When OFF, right rotation is set to + and left rotation is set to -, but when ON, right rotation is set to - and left
rotation is set to +.
* You can switch ON / OFF repeatedly by pressing the "DAT" switch.
* Short press the "FUN" switch to confirm the setting. Next is the setting for reset to Initial Setting.
The display changes every
time the "DAT" switch is
pressed.
Sound
Remove the load and press "RES"
Continuous sound
Intermittent sound
Remove the load and press "RES"
(fast)
Intermittent sound
Remove the load and press "RES"
(slow)
Short sound
The display changes every
time the "DAT" switch is
pressed.
The display changes every
time the "DAT" switch is
pressed.
The way to stop buzzer
switch.
switch.
switch.