Comunello Automation CU 230V 1M Manual de inicio rápido - Página 4
Navegue en línea o descargue pdf Manual de inicio rápido para Unidad de control Comunello Automation CU 230V 1M. Comunello Automation CU 230V 1M 4 páginas.
Imprimir página
G) PAUSE TIME - Automatic closing time programming
The automatic closing is factory disabled;
to enable it after a fixed period of time
(max. 4 min.) proceed as follow:
1. By the key SELECT, position yourself on the blinking LED L6
"PAUSE TIME";
2. Press once the key SET;
3. Wait for a desired time interval;
4. Press the key SET again;
5. The LED L6 will remain steady on and that period of time would
be set as time interval.
H) Remote control code programming (total opening)
PP CHANNEL gives an input to activate the total
stroke stored.
PPED CHANNEL gives an input to activate the pede-
strian or partial stroke the total stroke
Up to 120 remote controls can be memori-
zed in the control unit receiver.
Its programming is performed as follow:
1. By the key SELECT, position yourself on the blinking LED L3
"CODE TX";
2. Press key SET once to memorize the PP channel;
3. Send the selected code with your remote control;
4. The LED L3 will remain steady on for a second to indicate that
programming has been completed.
5. The LED L3 starts to blink again to indicate that you have 10
additional sec. to store a new code;
6 On expiry of those 10 sec. the LED L3 will remain steady on.
I) Remote control code programming (partial/pedestrian ope-
ning)
1. By the key SELECT, position yourself on the blinking LED L3
"CODE TX";
2. Press key SET twice to memorize the PPED channel;
3. Send the selected code with your remote control;
4. The LED L3 will remain steady on for a second to indicate that
programming has been completed. The extra time of 10 sec. to
store a new PPED channel is then preview as for the PP chan-
nel.
To watch videos you will need to have an internet connection and to install in your Tablet or Smartphone a QR code
reader, available on APPLESTORE for iOs devices or on GOOGLE PLAY for Android devices.
MAX 4 MIN
Rule of the first saved Remote control:
When programming remote controls the following rule is applied: if
the first remote to be saved is a rolling code type, the receiver will
subsequently accept only rolling code remotes (thus ensuring greater
anti-intrusion security); if the first remote to be saved is a fixed code
type, the receiver will accept both fixed and rolling code remotes,
although only the fixed part of the latter will be identified.
For the deletion of remote control codes
please check the installation and user ma-
nual or the video with the detailed pro-
gramming tutorial.
L) RESET
If it becomes necessary to reset the control unit to restore the factory
settings, press the SELECT and SET keys together; this will cause all
the indicator LEDs to light simultaneously followed immediately by
the control unit switching off.
WARNING!: by the above mentioned procedure the stored re-
mote codes WILL NOT be deleted; where necessary follow the above
mentioned procedure of deletion.
91300366 - Rev.00 - 15.11.18