Auber Instruments WS Series Manual rápido - Página 3
Navegue en línea o descargue pdf Manual rápido para Controlador de temperatura Auber Instruments WS Series. Auber Instruments WS Series 15 páginas. Programmable pid temperature controller with dual probe
También para Auber Instruments WS Series: Manual rápido (14 páginas), Manual de instrucciones (18 páginas), Manual de instrucciones (18 páginas), Manual rápido (14 páginas)
Imprimir página
4) Smoker generator control output status indicator. When lit, the smoker
generator control output is on. When off, the output is off.
5) Timer status indicator - When lit, right window shows the time passed since
power up. When it is off, right window shows the current temperature detected by
the probe 2.
6) SET Key - For showing current temperature settings, getting into parameters
setting mode and confirming various actions taken.
7) "-" Key - To decrement displayed value when in controller is in the parameter
setting mode. During normal operation, press it to cancel the alarm.
8) "+" Key - To increment displayed value when in controller is in the parameter
setting mode. During normal operation, press it will change the left window from
temperature to display which step the program is at.
9) Time Key - Change the display in right window between current timer and
temperature values.
2. Connecting and operating the controller
Install the sensor.
(Note: If you ordered wall mount sensor instead of free hanging sensor, please see the
separate instruction in the CD for its installation)
The controller is supplied with two probes. The one with the short tip is for measuring the
Figure 2. Back Panel
3