Conairphone FX2000 Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Teléfono Conairphone FX2000. Conairphone FX2000 7 páginas. Sport telephone 10 memory slim design

Imprimir página

Coil Cord Connection

Insert coil cord into modular jack located on the

end of the base.

Connect the other end into the modular jack

located on handset. (see diagram B)

Diagram B

Line Cord Connection

With modular jack telephone system, connect

the straight telephone line cord to the modular

jack located on the bottom of the base. Insert the

other end of cord into a modular wall jack. Make

sure all plugs snap firmly in place.

(see diagram C)

Diagram C

With a four prong style jack, simply use a plug in

a modular adaptor. (see diagram D)

Diagram D

Wall Mounting

Your CONAIRPHONE

is also designed to

mount on a wall surface over a modular wall

jack. Connect the short telephone line cord to

the modular jack located on the bottom of the

base. Insert the other modular plug into the wall

jack, making sure it snaps firmly in place.

Position the wall mount slots on the bottom of

the base over the two studs of the wall plate.

Pull down to lock in place. (see Diagram E)

Wall Mount Slots

Diagram E

OPERATION

Receiving a Phone Call

1. When your phone rings, pick up the handset

and use like any basic telephone.

2. Hang up the handset to release the

telephone line when conversation is completed.

Dialing a Call

Before dialing, make sure the Tone/Pulse switch

is correctly positioned for your type of service.

Pick up the phone and wait for a dial tone. Press

the keys for the number you want. Your

CONAIRPHONE

(pulse setting) uses electronic

pulses to simulate dialing action. Because of this

you might hear pulsing for a second or two after

the last button has been pressed.

KEY FEATURES

Last Number Redial

Your CONAIRPHONE

remembers the last

number dialed. If the number you dial is busy or

not being answered, hang up. If you want to

redial the last number automatically, press the

REDIAL button.

NOTE: You can redial the same telephone

number as many times as required. However,

once you dial another number the previous

number is erased.

Ringer Off/Low/High

Your CONAIRPHONE

features a harmonic

ringer which can be adjusted to a loud (high) or

soft (low) sound level. When you don't want to be

disturbed, slide the switch to the "OFF" position.

You can still make outgoing calls without being

disturbed by incoming calls.

Timed Flash Function

The FLASH key can be used to retrieve a new

dial tone after ending a call.

NOTE: The FLASH key is also a useful feature for

special telephone services such as call waiting

and three party calling. Press briefly, release and

perform the custom call procedure.

Receiver Volume Control

This control allows you to adjust your handset

volume from normal to high, for a more

comfortable listening level.

MEMORY FEATURES

Your telephone is equipped with 10 memories

for programming your most frequently dialed

numbers.

You can store up to 16 digits in each key (0-9).

To Program

1. Pick up handset (releasing hook switch).

2. Press and release STORE key.

3. Press the keys for the telephone number you

wish to store.

4. Press and release STORE key again.

5. Press the keypad number (0-9) you want that

telephone number stored in.

6. Your number is now stored.

7. To change a stored number, repeat the same

process. The new number will erase the old

stored number.

A memory index card is provided so you can

write down the person's name and memory key

it's stored in.

To Retrieve Memory Numbers

Pick up the handset, press the memory key, then

press the keypad number (0-9) which stores the

number you want to dial. Your call will be

automatically dialed.

TROUBLE SHOOTING GUIDE

DON'T RETURN IT YET!

If you have followed the instructions in this

manual, and have difficulty operating your

CONAIRPHONE

locate the " problem " and

solution to each below.

If the solution to your problem is not listed below,

call our toll-free service number 1-800-366-0937

and one of our experts will talk you through the

problem.

Problem: No dial tone.

• Improper installation. Recheck all modular

plugs connections.

Problem with the wiring.

• Try another phone jack. If your phone works on

another jack, you may have a problem with your

wiring. Contact your local phone company.

Problem: Cannot make outgoing calls.

• Check the tone/pulse switch. If positioned in

Tone (T) mode, switch to Pulse (P). You may

have pulse dialing service.

Problem: Phone doesn't ring.

• Ringer switch is not set correctly. Make sure

ringer Off/Low/High switch is in the On position.

• Too many telephones are installed on the

same line. Contact your local telephone

company to determine the maximum number of

extensions for your calling area.

Problem: The sound volume is too low.

• Another extension is off hook. Hang up

extension.

HEARING AID COMPATIBILITY

Your CONAIRPHONE

telephone is compatible

with inductively coupled hearing aids.

CONSUMER INFORMATION

This equipment complies with Part 68 of the FCC

rules and the requirements adopted by the ACTA.

On the bottom of this equipment is a label that

contains, among other information, a product

identifier of US: DJTTE10BFX2000. If requested,

this number must be provided to the telephone

company.

The applicable jacks (i.e. RJ11C) for this

equipment are provided in the packaging with

each piece of approved equipment. The jacks

are certified by Universal Service Order Codes

(USOC).

A plug and jack used to connect this equipment

to the premises wiring and telephone network

must comply with the applicable FCC Part 68

rules and requirements adopted by the ACTA. A

compliant telephone cord and modular plug are

provided with this product. They are designed to

be connected to a compatible modular jack that

is also compliant. See installation instructions

for details.