ADDER AdderLink X-DVIPRO-MS2 Manual del usuario - Página 13
Navegue en línea o descargue pdf Manual del usuario para Extensor ADDER AdderLink X-DVIPRO-MS2. ADDER AdderLink X-DVIPRO-MS2 16 páginas. Adder pro dvi
Imprimir página
Further information
This chapter contains a variety of information, including the following:
• Troubleshooting - see right
•
Getting assistance
•
Safety information
•
Warranty
•
Radio frequency energy statements
TROUBLESHOOTING
If you experience problems when installing or using the X-DVIPRO/X-DVIPRO-MS2
modules, please check through this section for a possible solution. If your problem is not
listed here and you cannot resolve the issue, then please refer to the
section.
No video image is displayed on the remote monitor
• Check the yellow indicators on the local and remote modules while no keys are
pressed on the keyboard and no mouse movements are being made - both indicators
should be continually on when a valid video signal is present.
LOCAL: If the yellow indicator is giving a regular flash (twice per second), then the
video feed to the local module is not valid. Try connecting a DVI monitor (preferably
using the same DVI link cable as used with the local module) directly to the computer
and check for a correct image.
REMOTE: If the yellow indicator is giving a regular flash (twice per second), then the
video feed via the link cable is not valid. If the link cable is long, try using a short link
cable temporarily to check for basic operation.
If the yellow indicators are off, then the link cable is not properly connected.
Getting assistance
12