ADDER AdderLink X-DVIPRO-MS2 Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Estensore ADDER AdderLink X-DVIPRO-MS2. ADDER AdderLink X-DVIPRO-MS2 16. Adder pro dvi

Further information

This chapter contains a variety of information, including the following:

• Troubleshooting - see right

•

Getting assistance

•

Safety information

•

Warranty

•

Radio frequency energy statements

If you experience problems when installing or using the X-DVIPRO/X-DVIPRO-MS2

modules, please check through this section for a possible solution. If your problem is not

listed here and you cannot resolve the issue, then please refer to the

section.

No video image is displayed on the remote monitor

• Check the yellow indicators on the local and remote modules while no keys are

pressed on the keyboard and no mouse movements are being made - both indicators

should be continually on when a valid video signal is present.

LOCAL: If the yellow indicator is giving a regular flash (twice per second), then the

video feed to the local module is not valid. Try connecting a DVI monitor (preferably

using the same DVI link cable as used with the local module) directly to the computer

and check for a correct image.

REMOTE: If the yellow indicator is giving a regular flash (twice per second), then the

video feed via the link cable is not valid. If the link cable is long, try using a short link

cable temporarily to check for basic operation.

If the yellow indicators are off, then the link cable is not properly connected.

Getting assistance